Schneider ABFM08S202 Cabled Connector Modicon

ABFM08S202 8-Channel Analog Input Cable for Modicon Quantum

Product Introduction

The ABFM08S202 from Schneider Electric offers a robust connection solution for Modicon Quantum automation systems. This cabled connector handles analog current signals across eight separate channels. Its shielded construction minimizes electrical interference, which is critical for accurate data acquisition. Additionally, the 6.6-foot (2-meter) cable length provides flexibility during installation. You can rely on this component for consistent performance in both control cabinets and field-mounted setups. Moreover, the ABFM08S202 simplifies wiring with its pre-assembled SUB-D connector.

Technical Specifications

This section details the core electrical and physical attributes of the ABFM08S202. The connector features 25 ways within its SUB-D housing. It uses AWG 24 wires, each with a 0.22 mm² section. Consequently, it supports a current rating of 1A and a voltage rating of 250V. Specifically, these ratings make it suitable for standard analog signal loops. Furthermore, the cable uses a multi-conductor, shielded design with PVC insulation. This construction effectively guards against electromagnetic noise in industrial settings.

Additionally, the ABFM08S202 is compatible with the 140AC013000 termination block. This pairing streamlines field wiring termination. The connector type ensures a secure and polarized connection, reducing the risk of incorrect insertion. For installation, the cable length of 2 meters offers ample reach without excessive slack. Meanwhile, the wire section of 0.22 mm² aligns with typical signal wiring practices.

Mechanical and Environmental Parameters

The ABFM08S202 operates reliably across a wide temperature range. It functions from -20 °C to +60 °C without performance degradation. Therefore, it suits both indoor climate-controlled areas and more demanding shop floor locations. The PVC insulation material provides good resistance to oils and chemicals commonly found in factories. Moreover, the shielded cable jacket adds a layer of physical protection against abrasion.

The connector's net weight is 0.45 kg, which is lightweight for easy handling. Its compact dimensions facilitate installation in crowded junction boxes. The SUB-D connector uses standard 25-pin configurations, simplifying cable tracing. Furthermore, the cable's flexibility aids routing around equipment corners. This design consideration reduces stress on the connector terminations over time.

Installation Guidelines

Installing the ABFM08S202 is straightforward for experienced technicians. First, ensure the Modicon Quantum PLC is powered down. Next, align the SUB-D connector with the corresponding port on the 140AC013000 module. Then, secure the connector using the jack screws to ensure a firm mechanical hold. Additionally, route the cable away from high-voltage power lines to prevent noise coupling. For best results, use cable ties to support the cable run at regular intervals.

Furthermore, verify the wiring polarity before connecting field devices. The ABFM08S202 does not require any special tools for installation. However, check that the AWG 24 wires match your field device terminals. Finally, perform a continuity check after installation to confirm all eight channels are correctly connected.

Packaging List

Your shipment of the ABFM08S202 includes the following items:

• One cabled connector assembly (2m length)

• Pre-wired SUB-D connector (25 ways)

• Installation guide (quick-start sheet)

• Cable labeling tags

Note: The package does not include termination blocks or mounting hardware.

Shipping Information

We dispatch all orders using reliable carriers. Shipping methods include Fedex, UPS, and DHL. Each shipment is tracked for your convenience. Please allow standard transit times depending on your location.

Frequently Asked Questions (FAQ)

Q1: Is the ABFM08S202 compatible with other Modicon series?
A1: This connector is specifically designed for the Modicon Quantum series. It pairs directly with the 140AC013000 termination block.

Q2: What type of signals does the ABFM08S202 support?
A2: It supports analog current input signals only, not voltage or digital signals.

Q3: Can I extend the cable length of the ABFM08S202?
A3: Extending the cable is not recommended. The 2-meter length is optimized for signal integrity. Using extensions may introduce noise.

Q4: How do I clean the ABFM08S202 connector?
A4: Use a dry, lint-free cloth to wipe the connector body. Avoid using solvents that could damage the PVC insulation.

Q5: What is the warranty period for the ABFM08S202?
A5: Warranty terms are provided upon purchase. Please refer to the official Schneider Electric policy for detailed coverage.