The Atlas Copco RTP1300-HR20 pneumatic nutrunner features a pistol grip and reversible operation. It provides a max torque of 960 ft-lb at 6.3 bar. Ideal for flange bolting in oil & gas, power generation, and wind energy sectors.
The RTP8100-GIR38 pneumatic screwdriver is a straight-type, reversible tool built for high-torque bolting. It delivers a max torque of 6000 ft-lb at 6.3 bar. Ideal for heavy industrial assembly and maintenance tasks.
The Atlas Copco LMS18 HR13/F is a pistol-grip non shut-off pneumatic impact wrench. It delivers a max torque of 110 ft-lb with a free speed of 8100 r/min. The 1/2" male square drive handles 10 mm bolts. Its Grease Retaining System ensures long service intervals. Ideal for fast tightening or disassembly with minimal reaction force.
The Atlas Copco LMS88 GIR38 is a heavy-duty non shut-off pneumatic impact wrench. It delivers a massive max torque of 7370 ft-lb with 540 blows per minute. The straight design features a 1-1/2" male square drive. Its Grease Retaining System ensures long service intervals. Ideal for large bolt tightening and disassembly with minimal reaction force.
The Atlas Copco LMS08 SR42 is a non shut-off pneumatic impact wrench built for tough environments. It delivers a max torque of 44 ft-lb with 1650 blows per minute. The straight design features a 1/4" female hex output. Its Grease Retaining System ensures long service intervals. Ideal for fast tightening or disassembly with minimal reaction force.
The Eaton MTL5314 is a single-channel trip amplifier for 2- or 3-wire 4-20mA transmitters. It supplies two configurable alarm signals via changeover relays. Each relay triggers independently when the input exceeds or falls below a setpoint. HART communication passes through without interruption. Ideal for Zone 0 and SIL applications.
The Eaton MTL5514D is a single-channel switch/proximity detector interface from the MTL5500 series. It accepts digital inputs from hazardous area sensors and provides two relay outputs. This isolator supports line fault detection (LFD) and phase reversal. Ideal for Zone 0, Zone 2, and SIL2/SIL3 safety loops.
The Eaton Crouse-Hinds MTL5511 is a single-channel isolator for switch or proximity detector inputs. It provides a 7-9Vdc sensor supply and features a relay contact output rated for Zone 2 hazardous areas. With SIL2/SIL3 certification and line fault detection, it suits safety-related applications.
The Eaton Crouse-Hinds MTL5513 is a two-channel isolator for switch or proximity detector inputs. It provides a 7-9V sensor supply and accepts digital signals from hazardous areas. Each channel features independent phase reversal and line fault detection with red LFD indication.
The Eaton Crouse-Hinds MTL5573 is a single-channel temperature converter for RTD or thermocouple inputs. It delivers a 4-20mA output with 500ms response time. Designed for Zone 0 hazardous areas, it includes galvanic isolation, early burnout detection, and configurable sensor failure behavior.
The Eaton Crouse-Hinds MTL5575 is a single-channel temperature converter designed for hazardous areas. It accepts thermocouple, RTD, or mV inputs and provides a 4-20mA output. With galvanic isolation and alarm functionality, it suits Zone 0 installations and offers reliable signal conditioning
The Eaton MTL5561 is a loop-powered two-channel interface for conventional fire and smoke detectors in hazardous areas. When a detector triggers, the safe-area current changes accordingly. This unit includes reverse input polarity protection. It suits Zone 0, IIC, T4–6 locations and Division 1, Group A hazardous areas.
