The Bently Nevada 3500/42M-01-00 is a 4-channel Proximitor/Seismic Monitor with internal terminations optimized for Seismoprobe sensors. This module accepts proximity, velocity, and acceleration transducer inputs, then conditions signals for comprehensive vibration and position monitoring. It delivers reliable machinery protection in demanding industrial environments.
The Bently Nevada 3500/42-06-00 is a 4-channel Proximitor/Seismic Monitor featuring internal barriers and terminations specifically designed for Velomitor sensors. This module accepts velocity, proximity, and acceleration transducer inputs, then conditions signals for comprehensive vibration and position monitoring. It delivers reliable machinery protection in demanding industrial environments.
The Bently Nevada 3500/42-04-00 is a 4-channel Proximitor/Seismic Monitor with built-in internal barriers. This module accepts input from proximity and seismic transducers, then conditions signals for critical vibration and position measurements. It is an ideal solution for machinery protection in hazardous areas.
The Bently Nevada 74712-06-05-04-00 is a high-temperature two-wire velocity transducer designed for absolute casing vibration measurement. It delivers a sensitivity of 20 mV/mm/s and operates from -29°C to +204°C. This model features a 0° mounting angle, a 1/2-20 UNF-3A stud, and a side-mount connector with no agency approvals.
The Bently Nevada 173688-01-20-12-05 is a 3300 XL 8 mm proximity probe designed for non-contact vibration and position measurement. It features a 2.0 metre FluidLoc cable with a Miniature ClickLoc connector. The probe carries CSA, ATEX, and IECEx approvals for hazardous area installation.
The Bently Nevada 74712-06-05-04-01 is a high-temperature two-wire velocity transducer designed for machinery monitoring in extreme thermal environments. It delivers a sensitivity of 20 mV/mm/s and operates from -29°C to +204°C. This model features a 0° mounting angle, a 1/2-20 UNF-3A stud, a side-mount connector, and CSA approval.
The Bently Nevada 173687-01-50-12-05 is a 3300 XL 8 mm proximity probe designed for non-contact vibration and position measurement. It features a 5.0 metre FluidLoc cable with a Miniature ClickLoc connector. The probe carries CSA, ATEX, and IECEx approvals for hazardous area installation.
The Bently Nevada 86517 Accelerometer Interface Module is a dedicated component for vibration monitoring systems. It converts charge signals from piezoelectric accelerometers into scaled acceleration and velocity outputs. Designed primarily for use with the Bently Nevada 3300/95 monitor, this module is crucial for safeguarding aeroderivative gas turbines and other critical rotating machinery.
The Bently Nevada 3300/12-01-20-00 is a dedicated AC power supply for 3300 monitoring racks. It converts mains power into regulated DC voltages for up to 12 monitors. A built-in noise filter ensures signal integrity, and it installs in the left-most rack position.
The Bently Nevada 45357-01 is a charge-coupled piezoelectric accelerometer with a sensitivity of 50 pC/g ±5%. It features a 4-bolt mounting pattern on a 1.188-inch square and an MS3100R-10SL-4P connector. This accelerometer is suitable for vibration monitoring on gas turbines and rotating machinery in both standard and hazardous area installations.
The Bently Nevada 45358-07 is a 7-meter (23 ft) Softline Extension Cable designed for accelerometer systems in moderate temperature environments. It features a twisted shielded pair with low-noise construction, protected by convoluted Teflon tubing. This cable provides a reliable signal connection between an accelerometer and its interface module in applications such as pumps, fans, and general industrial machinery.
The Bently Nevada 83387-132 is a 132-inch (3.35 m) Hardline Cable engineered for high-temperature accelerometer applications. It features mineral insulation and a stainless steel overbraid, enabling continuous operation up to +649°C. This cable delivers a stable, low-noise signal connection between an accelerometer and its interface module in extreme environments such as gas turbines, compressors, and furnace systems.
