The IV-500M from Keyence is a monochrome vision sensor designed for standard distance inspection. Specifically, this model covers 50 to 500 mm with a broad field of view. Furthermore, its manual focus lets operators fine-tune image sharpness directly. The IV-500M integrates camera, lighting, and processing into one IP67-rated housing.
The IV-500M covers an installed distance of 50 to 500 mm. At 50 mm, the view measures 25 × 18 mm, expanding to 210 × 157 mm at 500 mm. Meanwhile, the 1/3 inch monochrome CMOS sensor delivers 752 × 480 pixel resolution. Illumination uses a red LED with pulse or DC lighting modes available.
For tools, this sensor provides 16 detection tools and 1 position adjustment tool. Shape Detection, Area, Edge Pixels, and Pitch are among the available algorithms. Besides, 32 program settings enable rapid product changeover without reprogramming delays. The IV-500M also supports FTP client, EtherNet/IP, and PROFINET for network integration.
Power runs on 24 VDC with a 0.6 A maximum current draw. The IV-500M includes 6 inputs and 4 outputs. Outputs are open collector type with NPN or PNP selection. Therefore, wiring adapts to existing control cabinets. The M12 4-pin connector handles both 100BASE-TX and 10BASE-T Ethernet communication.
The main case uses aluminium die-casting for durability. Sealing material is NBR, while the front cover uses acrylic. This construction supports IP67 protection, excluding specific filter attachments. Operating temperature spans 0 to +50°C without freezing. Moreover, humidity tolerance reaches 35 to 85% RH with no condensation allowed. Vibration resistance follows 10 to 55 Hz at 1.5 mm double amplitude. Shock resistance is rated at 500 m/s² across six directions. Weight is approximately 270 g for the sensor body.
Mounting and Distance: First, mount the IV-500M using the POM adapter at the target inspection point. Keep the lens surface 50 to 500 mm from the object. The manual focus ring lets operators fine-tune sharpness during setup.
Wiring: Next, connect the M12 4-pin connector for Ethernet communication. Then, wire the 24 VDC power supply and input/output lines per the manual diagrams. The IV-500M accepts either non-voltage or voltage inputs.
Programming: Finally, configure detection tools and programs through the monitor or PC software. The 32-program memory allows storing different inspection recipes.
1 × Keyence IV-500M Vision Sensor Unit
1 × Mounting Adapter (POM)
1 × M12 Connector Protection Cap
Q1: What is the difference between the IV-500M and the IV-500MA?
A: The IV-500M uses manual focus for direct operator control. The IV-500MA offers auto focus for faster setup.
Q2: Can the IV-500M connect to a PLC directly?
A: Yes, it supports EtherNet/IP and PROFINET protocols for direct PLC communication.
Q3: What type of illumination does this sensor use?
A: The IV-500M uses a red LED with selectable pulse or DC lighting modes.
Q4: Is the IV-500M suitable for high-speed production lines?
A: Yes, the 16 detection tools and 32 programs support fast, repeatable inspection.
Q5: How many inspection programs can the IV-500M store?
A: It stores up to 32 programs for different product changeover requirements.
| Brand Name | |
| Model No. | IV-500M |
| Product Type | Vision Sensor |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
