Flexem FE6070H 7" Industrial IoT HMI Touch Screen

It balances high quality and low cost for a wide range of industrial equipment.

The unit uses a durable engineering plastic shell for stable long-term operation.

With the Flink IIoT module, it can easily upgrade to a cloud-connected smart terminal.

It provides 24-bit true color and 350 cd/m² brightness for clear display.

Wide viewing angles of 85°/85°/85°/85° ensure good visibility from multiple directions.

It is equipped with a 4-wire industrial resistive touchscreen for stable operation.

The touch interface works reliably even in harsh and dusty field environments.

The V2 model uses a 600 MHz ARM Cortex-A8 with 128MB Flash and 128MB DDR3.

The V3 model upgrades to a 1.2 GHz ARM Cortex-A7 with 4GB EMMC and 256MB DDR3.

Both versions ensure smooth screen switching and stable program execution.

Users can select the appropriate version based on project complexity.

It includes 1×USB slave 2.0 and 1×USB host 2.0 for peripheral and storage access.

Programs can be downloaded via USB, flash drive, or Ethernet for flexible commissioning.

Three independent serial ports support RS232, RS485, and RS422 for device communication.

This rich interface set ensures wide compatibility with PLCs and field instruments.

Rated power consumption is below 10W for energy-saving continuous operation.

It includes lightning and surge protection to improve system safety.

Power interruption tolerance is less than 5ms to avoid abnormal shutdown.

Front protection reaches IP65 with NEMA panel for dust and water resistance.

It can withstand 10–25Hz vibration (2G, 30min) in X/Y/Z directions.

Humidity range is 10%–95% RH, non-condensing for industrial environments.

Dimensions are 204×145×33.8mm with a cutout size of 192×138mm.

The lightweight design of about 560g simplifies installation and integration.

Next, connect power and communication cables according to the wiring diagram.

Then, configure communication parameters to match field devices.

Users can add the Flink IIoT module to enable cloud platform services.

Finally, test functions such as touch, communication, and display before formal use.

Q1: What is the screen size and resolution of FE6070H?

A1: The FE6070H uses a 7-inch LCD with 1024×600 resolution.

A2: It offers V2 (600MHz A8) and V3 (1.2GHz A7) processor versions.

A3: It has 3 serial ports supporting RS232, RS485, and RS422.

A4: Front side is IP65; rear side is IP20.

A5: Yes, it can be upgraded via the Flink IIoT module for cloud platform services.