The DS200SIOBH1ABA belongs to the GE Mark V series. GE designed this board for turbine control applications. Specifically, it works with gas, steam, and wind turbines. The board mounts inside a VME rack. It occupies one full VME slot. Moreover, it connects through the VME P1 connector. This DS200SIOBH1ABA replaces older revisions of the SIOB board. Therefore, it ensures reliable I/O handling in legacy systems.
This DS200SIOBH1ABA brings stable field I/O expansion. Firstly, it uses 20 jumpers for flexible configuration. Secondly, three switch blocks provide 18 total switches. Each block contains six switches. Thirdly, one 40-pin connector handles external signals. Furthermore, the onboard LED lights up during normal VME access. Consequently, operators get instant status feedback. Additionally, the conformal coating protects against moisture and dust. Thus, the board suits harsh industrial environments.
The DS200SIOBH1ABA operates as a VME Stand I/O Card. GE factory-sets the jumpers to default positions. However, some jumpers only support one position. You cannot change those. Meanwhile, other jumpers allow alternate settings. For instance, you can adjust the switch blocks to match specific drive requirements. Specifically, the LED indicates active VME communication. This board includes three revisions of the original design. Therefore, always verify your existing board’s jumper layout before installing the DS200SIOBH1ABA.
Follow these steps for a safe replacement. First, power down the drive completely. Next, remove the screws holding the old board. Then, pull the board out with two hands. Avoid hitting other components. Place the old board on a static protection bag. Use a clean, dry surface nearby. Afterwards, slide the new DS200SIOBH1ABA out of its sealed bag. Carry it with two hands. Set the switches exactly like the old board. Meanwhile, match every jumper position. This ensures identical drive behavior. Finally, insert the board into the same VME slot. Secure it with the screws.
1. Does the DS200SIOBH1ABA work with all Mark V systems?
Yes, this DS200SIOBH1ABA fits Mark V Group 1 applications. It replaces older SIOB variants.
2. Can I change all jumpers on this board?
No. Some jumpers have only one supported position. GE locks these for safe operation.
3. How do I verify my old jumper settings?
Visually inspect your old board. Then, set the new DS200SIOBH1ABA exactly the same way.
4. What does the LED indicate during use?
The LED glows when the VME rack accesses the DS200SIOBH1ABA. It shows normal functional status.
5. What shipping methods do you offer?
We ship via FedEx, UPS, and DHL worldwide.
| Brand Name | GE |
| Model No. | DS200SIOBH1ABA |
| Product Type | VME Stand I/O Card |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
