The Bently Nevada 330701-00-10-90-12-00 belongs to the well-established 3300 XL series. This 11 mm proximity probe provides non-contact measurement of vibration and shaft position. Specifically, this model comes without armor and uses a 1/2-20 UNF thread. Its total length of 5.0 meters makes it ideal for medium-distance installations. Importantly, this five-meter probe is designed exclusively for use with the five-meter Proximitor Sensor.
The 330701 probe incorporates a Polyphenylene sulfide (PPS) tip for excellent wear resistance. In addition, its case utilizes AISI 304 stainless steel (SST) for superior corrosion protection. Furthermore, the cable assembly employs a 75 Ω triaxial design with FEP insulation for signal integrity. The probe's DC resistance from the center conductor to the outer conductor measures 7.2 ± 0.8 ohms. Meanwhile, the connector type is the Miniature coaxial ClickLoc connector with FluidLoc cable. For this variant, agency approval is not required. Consequently, this robust design ensures dependable performance in demanding industrial environments.
This device performs reliably under extreme conditions. For example, its operating and storage temperature ranges from -51°C to +177°C. Additionally, the pressure seal uses a Viton O-ring for effective differential sealing. Meanwhile, the recommended probe case torque is 15.2 N•m. However, the maximum rated torque reaches 45.2 N•m for installation safety. Moreover, the cable's minimum bend radius is 25.4 mm (1.0 in) both with and without armor. Therefore, this sensor provides consistent measurement stability throughout its service life.
The five-meter Bently Nevada probe requires specific pairing for proper operation. First, this 5.0-meter model is designed to work exclusively with the five-meter Proximitor Sensor. Next, using it with a different Proximitor may result in inaccurate readings. Additionally, the total length option 50 indicates this specific 5.0-meter configuration. Meanwhile, the DC resistance value of 7.2 ± 0.8 ohms confirms proper cable characteristics for this length. Thus, always verify your Proximitor compatibility before installation.
Correct installation ensures optimal sensor performance and longevity. First, clean the mounting surface thoroughly to eliminate debris. Next, thread the probe into the housing using the 1/2-20 UNF threads carefully. Then, apply the recommended torque of 15.2 N•m to avoid over-tightening. Meanwhile, handle the ClickLoc connector gently; finger-tight torque is sufficient for connection. Finally, avoid exposing the probe to temperatures below -34°C. Otherwise, premature seal failure may compromise the sensor.
The package for the 330701-00-10-90-12-00 includes:
1 x Bently Nevada 3300 XL 11 mm Probe (5.0m)
1 x FluidLoc Cable Assembly with ClickLoc Connector
1 x Installation Sheet
Note: Calibration certificates and warranty are not included in this package.
1. What is the total cable length of this probe?
The total length option for this specific model is 5.0 meters (16.4 feet).
2. Can I use this 5m probe with any Proximitor Sensor?
No, this 330701 probe is designed exclusively for use with the five-meter Proximitor Sensor only.
3. What is the recommended torque for installation?
The recommended torque for the probe case is 15.2 N•m.
4. What material is used for the probe tip?
The probe tip material is Polyphenylene sulfide (PPS).
5. Do you ship internationally?
Yes, we ship worldwide using FedEx, UPS, and DHL.
| Brand Name | |
| Model No. | 330701-00-10-90-12-00 |
| Product Type | Proximity Probe |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
