The Bently Nevada 330195-02-12-05-00 represents a cornerstone of reliable machine condition monitoring. For instance, it provides accurate, non-contact measurement of shaft vibration and position in critical rotating equipment. Meanwhile, its reverse mount configuration offers enhanced flexibility for various installation scenarios. Specifically, engineers design this model for demanding industrial applications, including steam turbines, gas compressors, and high-speed pumps. Consequently, it delivers the high-integrity data necessary for effective predictive maintenance programs. Furthermore, the 3300 XL 8 mm transducer enjoys an excellent reputation for long-term durability and signal stability.
This 330195-02-12-05-00 model comes with a total length of 0.5 metres (1.6 feet). In addition, its case features a standard 3/8-24 UNF thread with a maximum thread engagement of 0.563 inches. Moreover, the probe tip is constructed from rugged Polyphenylene sulfide (PPS), which offers superior chemical resistance. Similarly, the probe case itself is manufactured from AISI 303 or 304 stainless steel (SST) for enhanced corrosion protection. For electrical characteristics, the nominal probe DC resistance (RPROBE) from the center conductor to the outer conductor is 7.45 ± 0.50 Ω for the 0.5-metre length. Therefore, this critical value ensures proper system calibration and accurate measurement outputs.
The Bently Nevada 3300 XL probe operates effectively across an exceptionally wide temperature range. For the standard configuration, the operating and storage temperature spans from -52°C to +177°C (-62°F to +350°F). However, it is critical to note that exposing the probe to temperatures below –34˚C (-30˚F) may cause premature failure of the pressure seal. Nevertheless, the probe demonstrates excellent resilience to high-humidity conditions. For instance, it shows less than a 3% change in Average Scale Factor (ASF) when tested at 93% relative humidity for up to 56 days. This testing follows IEC standard 68-2-3 rigorously. Additionally, the probe sealing material consists of a Viton® O-ring, which effectively seals differential pressure between the probe tip and the case.
When installing the 330195-02-12-05-00, operators must consider several key factors carefully. First, ensure the threads are perfectly clean and completely undamaged for proper engagement. Next, verify that the maximum thread engagement length of 0.563 inches is strictly observed. Furthermore, proper grounding is absolutely essential to prevent electrical noise from compromising the measurement signal. Meanwhile, route the probe cable and connector carefully to avoid sharp bends or excessive mechanical stress. In addition, always observe the torque specifications provided in the system's installation manual. For this reason, the reverse mount design of this proximity probe may require specific clearance considerations within the mounting fixture. Finally, double-check all connections before powering up the monitoring system.
Each unit of the Bently Nevada 330195-02-12-05-00 is carefully packaged to prevent any damage during transit. Specifically, the standard packaging includes the probe itself with its integral cable and connector. We also ensure robust protection for the sensitive tip and connector using anti-static materials. Moreover, all orders are dispatched using expedited and reliable shipping services. Therefore, we utilize global carriers such as FedEx, UPS, and DHL. Consequently, your critical measurement device arrives safely and promptly at your facility, regardless of location. This logistics approach minimizes downtime and supports your maintenance scheduling effectively.
1. What is the exact thread size for the Bently Nevada 330195-02-12-05-00?
The Bently Nevada 330195-02-12-05-00 features a standard 3/8-24 UNF thread, which is compatible with most common mounting fixtures.
2. Are the 3300 XL 8 mm proximity probes pressure tested before shipping?
No, the 3300 XL 8 mm probes are not pressure tested prior to shipment. However, the manufacturer can provide this service upon special request by contacting their custom design department directly.
3. What is the operating temperature limit for this reverse mount probe?
This 330195-02-12-05-00 model has a standard operating temperature range of -52°C to +177°C (-62°F to +350°F). Nevertheless, extended temperature range options are available for more extreme environments.
4. Can this probe be used in a high-humidity environment?
Yes, the 3300 XL probe is specifically designed for high-humidity conditions. For example, testing shows it exhibits less than a 3% change in its scale factor after 56 days in 93% relative humidity.
5. What material is the probe tip made of?
The tip of the Bently Nevada 3300 XL proximity probe is made from rugged Polyphenylene sulfide (PPS) . Therefore, it offers excellent chemical resistance and thermal stability in harsh industrial environments.
| Brand Name | |
| Model No. | 330195-02-12-05-00 |
| Product Type | 8 mm Proximity Probes |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
