The Bently Nevada 330106-05-30-15-02-CN belongs to the trusted 3300 XL series. This 8 mm reverse mount probe measures vibration and position in rotating machinery. You will find its design ideal for tight spaces where standard probes do not fit. The probe uses a PPS tip and a stainless steel case. Moreover, its 1.5 meter cable ends with a ClickLoc connector for secure attachment.
This model includes M10x1 threads with a maximum engagement length of 15 mm. The total probe length option 15 means 1.5 meters (4.9 feet). The connector option 02 specifies a Miniature ClickLoc coaxial connector. Agency approval option CN indicates country-specific compliance.
The nominal DC resistance from center conductor to outer conductor is 7.73 ± 0.50 Ω for the 1.5 m length. The probe cable uses 75Ω triaxial FEP insulation. Additionally, the connector uses gold-plated brass or beryllium copper. The probe case material is AISI 303 or 304 stainless steel (SST). The probe tip material is polyphenylene sulfide (PPS).
The probe weighs approximately 323 g per meter (11.4 oz per meter). Its tensile strength reaches 330 N (75 lbf) from case to lead. At the lead-to-extension cable connector, it reaches 270 N (60 lbf).
For temperature, the standard probe operates from -52°C to +177°C (-62°F to +350°F). However, exposing it below –34°C (-30°F) may damage the pressure seal. The extended temperature range tip handles up to +218°C (+425°F). The cable and connector for extended range handle -51°C to +260°C (-60°F to +500°F).
Humidity testing shows less than a 3% change in Average Scale Factor (ASF) after 56 days at 93% relative humidity (IEC 68 2 3). The pressure seal uses a Viton® O-ring. Note that probes are not pressure tested before shipment.
First, ensure the mounting hole matches M10x1 threads. Then, apply proper torque without over-tightening. Use the ClickLoc connector to attach the probe to the extension cable. Keep the cable bend radius gentle to avoid damage. Additionally, avoid exposing the probe tip to temperatures below –34°C before installation. Finally, verify the total length of 1.5 meters suits your measurement point.
Bently Nevada 330106-05-30-15-02-CN probe (1 unit)
Miniature ClickLoc coaxial connector (pre-attached)
Installation instruction sheet
Note: No certificates or warranty documents are included.
We ship via FedEx, UPS, or DHL. Delivery typically takes 3–7 business days depending on your location.
1. Can I use the Bently Nevada 330106-05-30-15-02-CN in high-humidity environments?
Yes. It passes 56 days of 93% humidity testing with less than 3% ASF change.
2. What happens if the probe sees temperatures below -34°C?
Exposure below -34°C may cause premature failure of the pressure seal. Avoid this condition.
3. Is the 330106-05-30-15-02-CN pressure tested before shipping?
No. Bently Nevada does not pressure test these probes prior to shipment. Contact custom design for testing needs.
4. What cable length option does 15 represent?
Option 15 means a total probe length of 1.5 meters (4.9 feet).
5. Which connector does the 330106-05-30-15-02-CN include?
It includes a Miniature ClickLoc coaxial connector (option 02).
| Brand Name | Bently Nevada |
| Model No. | 330106-05-30-15-02-CN |
| Product Type | Reverse Mount Probe |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
