Bently Nevada 330101-00-15-10-01-00 8mm Probe

Product Introduction

The 330101-00-15-10-01-00 is a precision eddy current probe from Bently Nevada. It belongs to the trusted 3300 XL series. This 8 mm probe measures vibration and position accurately. Its 3/8-24 UNF threaded case ensures secure installation. The probe has a 1.5-inch overall case length. Its total cable length measures 1.0 meter. This probe uses a miniature coaxial ClickLoc connector. It also includes a connector protector for added durability. This model originates from the U.S.A.

Key Technical Specifications

The 330101-00-15-10-01-00 probe delivers precise measurements. Its linear range extends to 2 mm. This range starts at approximately 0.25 mm from the target. For radial vibration, the recommended gap setting is -9 Vdc. This corresponds to roughly 1.27 mm. The incremental scale factor reaches 7.87 V/mm. This provides a 200 mV/mil output. The accuracy includes a ±5% interchangeability error. This applies for standard systems up to 5 meters. For 9-meter systems, the error increases to ±6.5%. The nominal probe DC resistance is 7.59 ± 0.50 Ω. Furthermore, the extension cable capacitance is 69.9 pF/m typical.

Mechanical Construction and Durability

This probe incorporates several patented design features. A TipLoc molding method ensures a robust bond. This bond connects the probe tip to the probe body securely. Additionally, a CableLoc design delivers 330 N pull strength. This securely attaches the probe cable to the tip. The probe tip uses Polyphenylene sulfide (PPS) material. This material provides excellent chemical resistance. The probe case uses AISI 303 or 304 stainless steel. This offers strong physical protection. The 8 mm diameter provides thicker encapsulation. Consequently, it results in a more rugged probe design. It also provides a stronger and more robust case.

Environmental and Operating Conditions

The 330101-00-15-10-01-00 operates across a wide temperature range. Its standard operating temperature spans -52°C to +177°C. The probe also has specific temperature classifications. For EPL Ga and Gc, T1 is rated at -55°C to +232°C. The probe seals differential pressure effectively. It uses a Viton O-ring for this purpose. However, probes do not undergo pressure testing before shipment. The relative humidity test shows minimal impact. There is less than a 3% change in scale factor. This holds true at 93% humidity for up to 56 days. The probe can operate at altitudes up to 6561 feet.

Field Wiring and System Integration

Proper wiring is essential for optimal performance. The 330101-00-15-10-01-00 supports field wiring of 0.2 to 1.5 mm². This corresponds to 16 to 24 AWG. We recommend using 3-conductor shielded triad cable. Tinned field wiring is also a good choice. The maximum field wiring length reaches 305 meters. This length connects the Proximitor Sensor to the monitor. However, longer wiring affects high-frequency signals. Refer to frequency response graphs for signal rolloff data. The probe integrates seamlessly with standard monitoring systems. It provides reliable data for machine protection.

Packaging List

Your shipment will include the following items:

• One Bently Nevada 330101-00-15-10-01-00 3300 XL 8 mm Probe

• One miniature coaxial ClickLoc connector with connector protector

Shipping Information

We ship all orders using major carriers. Specifically, we use FedEx, UPS, and DHL. The probe is packaged securely to prevent damage. We dispatch orders within 24 hours of payment confirmation.

Frequently Asked Questions (FAQ)

Q1: What is the length of the cable on the 330101-00-15-10-01-00 probe?
A1: The total cable length option is 10, which means it is 1.0 metre or approximately 3.3 feet long.

Q2: What type of connector does this probe use?
A2: This probe uses a miniature coaxial ClickLoc connector. It also includes a connector protector for added durability.

Q3: What is the recommended gap setting for this probe?
A3: The recommended gap setting for radial vibration measurements is -9 Vdc. This corresponds to approximately 1.27 mm or 50 mils.

Q4: What materials are used in the construction of this probe?
A4: The probe tip is made from Polyphenylene sulfide (PPS). The probe case is constructed from AISI 303 or 304 stainless steel.

Q5: What is the maximum field wiring length for this probe system?
A5: The maximum field wiring length between the 3300 XL Proximitor Sensor and the monitor is 305 meters or 1,000 feet.