The 146054-040-10-02-05 provides reliable position and vibration sensing for rotating machinery.
This probe uses an alumina ceramic cap to withstand high temperatures and abrasive conditions.
Its 304 stainless steel case offers excellent corrosion resistance in tough industrial environments.
The unit comes with a 1.0 meter standard coaxial ClickLoc cable for secure connections.
It supports pressure sealing up to 34 Bar (500 psi) for pressurized equipment monitoring.
Wide temperature tolerance allows operation in extreme thermal environments safely.
The 146054-040-10-02-05 meets global hazardous area standards for versatile deployment.
It delivers stable linear performance when paired with 3300 XL system components.
The 146054-040-10-02-05 is a ceramic capped proximity probe with 4.0 inch case length.
Total system length is 1.0 meter (3.3 feet) with a standard coaxial cable.
It uses a miniature coaxial ClickLoc connector for fast and reliable mating.
Agency approvals include CSA, ATEX, and IECEx for hazardous location installation.
Probe thread size is 3/8-24 UNF with maximum thread engagement of 0.563 inch.
Nominal DC resistance is 7.59 ±0.50 ohms between center and outer conductors.
Linear range spans 1.52 mm (60 mils) from 0.25 mm to 1.78 mm from the target.
Incremental Scale Factor is 7.87 V/mm (200 mV/mil) with ±6.5% tolerance.
Probe tip uses high-durability alumina ceramic (Al₂O₃) for long service life.
Probe case construction uses AISI 304 stainless steel for strength and protection.
Cable uses 75 Ω coaxial FEP insulation for stable electrical performance.
Operating and storage temperature ranges from -51°C to +177°C (-60°F to +351°F).
Pressure rating reaches 34 Bar (500 psi) with nitrogen sealing capability.
Multiple temperature classifications support T1 through T5 hazardous area ratings.
Mount the 146054-040-10-02-05 using the 3/8-24 UNF threaded case.
Set the probe gap between 0.25 mm and 1.78 mm for full linear measurement range.
Engage threads no deeper than 0.563 inch to avoid mechanical binding.
Connect the ClickLoc coaxial connector firmly to ensure proper signal transfer.
Route the 1.0 meter cable away from sharp edges and high-temperature surfaces.
Ground the system properly to reduce electrical noise and interference.
Confirm the installation meets ATEX, IECEx, and CSA requirements for hazardous areas.
Do not exceed 34 Bar pressure when using the probe in sealed applications.
Maintain temperature within rated limits to preserve certification and performance.
Use only AISI 4140 steel targets to ensure accurate system calibration.
| Brand Name | Bently Nevada |
| Model No. | 146054-040-10-02-05 |
| Product Type | Proximity Probe |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
