Allen-Bradley 1606-XLP30B Compact Power Supply
The 1606-XLP30B belongs to the Bulletin 1606-XL performance series. Rockwell Automation designed this compact unit for small loads and tight cabinet spaces. It provides stable 12 V DC output at 30 W rated power. Engineers use it for sensors, relays, and small controllers. This power supply converts AC or DC input into regulated DC output. Its slim 45 mm housing saves valuable DIN rail space.
Technical Specifications
The 1606-XLP30B accepts a wide input range. AC input spans 100 to 240 V nominal. DC input covers 110 to 300 V. Output voltage is 12 V nominal with an adjustment range of 12 to 15 V. The unit delivers 3.0 A nominal current. Current range runs from 3.0 A down to 2.5 A. Rated power reaches 30 W. Efficiency is 84.0% typical. Ripple and noise stay at 10 mV maximum, which is very low for a compact unit. These figures support clean power for sensitive small loads.
Additionally, spring terminals enable fast, tool-free wiring. The adjustable output helps compensate for voltage drop across long cables. Moreover, DIN rail mounting simplifies panel assembly. However, this model has no DC OK relay contact, so status monitoring is not available.
Mechanical and Environmental Parameters
The unit measures 75 mm in height, 45 mm in width, and 91 mm in depth. It weighs just 250 g. The IP20 protection rating suits enclosed cabinet use. Operating temperature ranges from -10 to +70 °C. Storage temperature and relative humidity are not published by the manufacturer. These ratings support reliable operation in typical industrial settings.
Installation Guide
First, mount the 1606-XLP30B on a standard 35 mm DIN rail. Next, connect the input wires to the spring terminals. Then set the output voltage via the front adjustment potentiometer. After that, connect the DC output to the load circuit. Finally, verify the output with a multimeter before powering the load. Keep clearance above and below the housing for airflow.
Packaging List
1 × 1606-XLP30B power supply unit
1 × Installation instruction sheet
1 × DIN rail mounting clip (pre-installed)
FAQ
Q1: What input voltages does the 1606-XLP30B accept?
A: It accepts AC 100 to 240 V nominal and DC 110 to 300 V. This wide range covers most industrial power networks.
Q2: Can I adjust the output voltage?
A: Yes. A front potentiometer adjusts output from 12 V to 15 V. This feature helps compensate for cable voltage drops.
Q3: Does this model include a DC OK relay?
A: No. The compact 1606-XLP30B lacks a DC OK relay contact. Choose the XLS series if status monitoring is required.
Q4: What is the operating temperature range?
A: It operates from -10 to +70 °C. Storage temperature and humidity are not published by the manufacturer.
Q5: Which shipping methods do you use?
A: We ship via Fedex, UPS, and DHL. All orders include tracking and careful packaging.
