The Bently Nevada 330730-080-02-CN serves as a critical component in the 3300 XL transducer system. This extension cable connects 3300 XL 11 mm probes to Proximitor Sensors, enabling accurate vibration and position measurements. Moreover, its robust construction ensures reliable signal transmission over extended distances.
The 330730-080-02-CN offers an 8.0-meter (26.2-foot) cable length, providing flexibility for various installation scenarios. This model features a standard cable configuration with a connector protector that safeguards connections in humid or moist environments. The country-specific agency approval option (CN) ensures compliance with regional regulatory requirements. Furthermore, this extension cable delivers a typical capacitance of 69.9 pF/m (21.3 pF/ft), maintaining signal fidelity across its length.
This extension cable utilizes 75 Ω triaxial construction with fluoroethylene propylene (FEP) insulation. FEP offers excellent dielectric properties and chemical resistance, preserving signal integrity in harsh industrial settings. The connector protector adds an extra layer of defense against environmental contaminants. Additionally, each extension cable includes silicone tape as an alternative protection method, though we do not recommend using this tape in applications where the connection will contact turbine oil. Gold-plated brass ClickLoc connectors feature on all transducer system components. These connectors lock securely into place, effectively preventing accidental disconnection.
The 330730-080-02-CN carries country-specific approvals (CN) that satisfy local regulatory standards. This certification ensures seamless integration into installations requiring regional compliance. The extension cable also meets rigorous performance standards for industrial monitoring applications.
This extension cable operates reliably across an exceptional temperature range, from -52°C to +177°C (-62°F to +351°F). This wide thermal tolerance suits both extreme cold and high-heat environments commonly found in turbine and compressor monitoring. The FEP insulation maintains its physical and electrical properties throughout this entire temperature spectrum, ensuring consistent performance.
The 330730-080-02-CN exhibits precise electrical specifications that guarantee measurement accuracy. The center conductor to center conductor resistance measures 2.0 ± 0.5 ohms, while the coaxial conductor to coaxial conductor resistance reads 0.6 ± 0.2 ohms. These low resistance values minimize signal loss over the 8.0-meter cable length. For field wiring, we recommend using three-conductor shielded triad cable with conductors sized from 0.2 to 1.5 mm² (16 to 24 AWG). The maximum field wiring length between the Proximitor Sensor and the monitor reaches 305 meters (1,000 feet). However, please consult the frequency response graph for signal rolloff considerations when using longer wiring runs.
Gold-plated brass ClickLoc connectors feature prominently in the 3300 XL transducer system design. These connectors lock firmly into place, ensuring a secure connection that resists vibration-induced loosening. The connector protector option provides additional protection for connectors in humid or moist environments. We recommend connector protectors for all installations, as they offer increased environmental protection. The silicone tape provided with each extension cable serves as an alternative, though we advise against using it where turbine oil exposure may occur.
The 330730-080-02-CN extension cable integrates seamlessly with the complete 3300 XL 11 mm probe system. The system features the patented TipLoc molding method, which creates a robust bond between the probe tip and the probe body. Additionally, the CableLoc design securely attaches the probe cable to the probe tip, providing an impressive 330 N (75 lb) pull strength. These engineering innovations ensure long-term reliability in demanding machinery monitoring applications. The probe itself comes in various case configurations, including armored and unarmored versions with ½-20, 5/8-18, M14 x 1.5, and M16 x 1.5 probe threads. Reverse mount versions offer either 3/8-24 or M10 x 1 threads.
3300 XL Probes and Extension Cables can also feature the FluidLoc cable option. This option prevents oil and other liquids from leaking out of the machine through the cable's interior. Such protection proves especially valuable in turbine and compressor applications where oil contamination poses a significant concern.
Installing the 330730-080-02-CN extension cable requires attention to several key points. First, ensure the Proximitor Sensor calibration matches your target material. By default, factory calibration targets AISI 4140 steel, though we can provide calibration to other materials upon request. Next, connect the extension cable to the probe using the ClickLoc connector, ensuring it locks securely. Then, route the cable away from high-temperature surfaces and moving parts. Finally, apply the connector protector or silicone tape as appropriate. Avoid using silicone tape in turbine oil environments.
1 x Bently Nevada 330730-080-02-CN 3300 XL 11 mm Extension Cable (8.0 m / 26.2 ft)
1 x Connector Protector
1 x Silicone Tape
1 x Installation Guide
We ship all orders via FedEx, UPS, or DHL to ensure fast and reliable delivery worldwide.
Q1: What is the length of this extension cable?
This model provides an 8.0-meter (26.2-foot) extension cable, suitable for installations requiring moderate separation between probe and sensor.
Q2: What connectors does this cable use?
It features gold-plated brass ClickLoc connectors that lock securely into place, preventing accidental disconnection.
Q3: What is the operating temperature range?
The cable operates reliably from -52°C to +177°C (-62°F to +351°F), accommodating extreme industrial conditions.
Q4: Can I use silicone tape instead of the connector protector?
Yes, silicone tape is provided with each extension cable. However, we do not recommend using it where the connection will be exposed to turbine oil.
Q5: Is this cable compatible with armored probes?
Yes, this extension cable works with all 3300 XL 11 mm probe configurations, including both armored and unarmored versions.
| Brand Name | |
| Model No. | 330730-080-02-CN |
| Product Type | Extension Cables |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
This Bently Nevada 31000 proximity probe housing comes complete with a 3300 XL 8 mm probe and a 1.0-meter cable. Specifically, this model provides a 2.5-inch probe penetration along with a 2.0-inch standoff adapter. Furthermore, its rugged construction ensures reliable performance in demanding industrial environments.
This Bently Nevada 31000 proximity probe housing comes complete with a 3300 XL NSv probe and a 0.5-meter cable. Specifically, this model provides a 3.5-inch probe penetration and includes a cable seal grip with multiple grommet sizes. Furthermore, its rugged construction ensures reliable performance in demanding industrial environments.
This Bently Nevada 31000 proximity probe housing offers robust protection for sensors in harsh industrial environments. Specifically, this model features a 3.1-inch probe penetration and a 3/4-14 NPT mounting thread. Furthermore, it is designed for reliable performance in demanding applications.
The Bently Nevada 31000-28-05-50-050-03-02 is a 31000 Proximity Probe Housing Assembly designed for 3300 XL 8 mm probes with multiple approvals. It features a 5.0-inch standoff adapter, 5.0-inch probe penetration, 3/4-14 NPT thread, and comprehensive fittings including cable seal grip. This assembly provides Type 4X/IP66 protection and operates from -51°C to +105°C.
This Bently Nevada 330730-040-02-CN extension cable provides a reliable connection for 3300 XL 11 mm proximity probes. Specifically, this model offers a 4.0-meter length with a standard connector protector. Furthermore, its FEP insulation and triaxial construction ensure signal integrity in demanding environments.
The Bently Nevada 330730-040-03-05 is a robust 4.0-meter, armored extension cable from the trusted 3300 XL series. It features a flexible AISI 302 SST armor with an FEP jacket and includes a connector protector. This model comes with multiple agency approvals, ensuring reliable signal transmission in demanding industrial environments.
The 21000-28-05-00-105-04-02 is a Bently Nevada proximity probe housing assembly. It includes a 3300 XL 8 mm probe, 0.5 m cable, 10.5 in penetration, and 3/4-14 NPT mounting for machinery protection.
The 21000-28-05-45-020-03-02 is a Bently Nevada proximity probe housing assembly. It features a 3300 XL 8 mm probe, 0.5 m cable, 4.5 in standoff adapter, and 3/4-14 NPT mounting for machinery protection.
BMXXBP0400H Modicon X80 4-Slot Ruggedized Backplane Technical Guide Product Introduction The BMXXBP0400H belongs to the Modicon X80 automation platform. Specifically, this four-slot backplane provides a stable mounting base for X80 I/O modules.…
Modicon X80 Rack Backplane BMXXBP0800 Technical Guide for Installation and Maintenance Product Introduction The BMXXBP0800 is a standard 8-slot backplane from Schneider Electric's Modicon X80 range, compatible with both Modicon…
Discover the GE IC200PWR102 expanded power supply for VersaMax PLCs. Dual AC input, 5VDC/3.3VDC output, overload protection. Ensure uptime with genuine parts from SpareTechPLC.
Discover the GE Fanuc IC200PWR101 VersaMax power supply module. Learn about its 120/240 VAC input, 5 VDC and 3.3 VDC outputs, and how it ensures reliable PLC backplane power.
Fast delivery for urgent requirements.
Large stock ensures immediate availability.
Authentic, high-quality PLC components.
Reliable support to clients worldwide.