330190-035-00-00 Bently Nevada 3300 XL Cable

Bently Nevada 330190-035-00-00 3300 XL ETR Extension Cable

Product Introduction

The Bently Nevada 330190-035-00-00 is a high-quality extension cable designed specifically for the 3300 XL proximity probe system. This 3.5-meter standard cable features FEP insulation and operates reliably from -52°C to +177°C. The 00 suffix indicates standard construction without armoring, while the 00 agency approval option means no specific country certifications are required. This configuration is ideal for general industrial monitoring applications where extended temperature range capability is needed but armored protection is not necessary.

Technical Specifications

This section details the core electrical and physical parameters of the 330190-035-00-00 extension cable.

• Cable Length: 3.5 meters (13.1 feet)

• Cable Option: Standard cable (non-armored)

• Agency Approval: Not required (00)

• Center Conductor Resistance (RCORE): 0.77 ± 0.12 Ω

• Outer Conductor Resistance (RJACKET): 0.23 ± 0.05 Ω

• Capacitance: 69.9 pF/m (21.3 pF/ft) typical

• Cable Type: 75Ω triaxial with FEP insulation

• Minimum Bend Radius: 25.4 mm (1.0 in)

• Connector Material: Gold-plated brass or gold-plated beryllium copper

• Maximum Connector Torque: 0.565 N•m (5 in•lbf)

• Weight (Standard): 34 g/m (0.4 oz/ft)

Furthermore, this Bently Nevada extension cable is electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components. However, you must observe the minimum permissible cable bend radius during installation. Meanwhile, the gold-plated connectors ensure reliable signal transmission and excellent corrosion resistance.

Field Wiring Recommendations

Proper field wiring is essential for optimal system performance with the 330190-035-00-00.

Specifically, use 0.2 to 1.5 mm² (16 to 24 AWG) tinned field wiring. We recommend using 3-conductor shielded triad cable for best results. The maximum length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). However, please consult the frequency response graphs for signal rolloff at high frequencies when using longer field wiring lengths.

Linear Range and Gap Setting

The 330190-035-00-00 works within the following system parameters.

• Linear Range: 2 mm (80 mils), beginning at approximately 0.25 mm (10 mils) from target

• Full Linear Range: 0.25 to 2.3 mm (10 to 90 mils), approximately -1 to -17 Vdc

• Recommended Gap Setting (Radial Vibration): -9 Vdc [approximately 1.27 mm (50 mils)]

Mechanical and Environmental Ratings

The Bently Nevada 330190-035-00-00 offers reliable performance in demanding conditions.

• Operating Temperature Range: -52°C to +177°C (-62°F to +350°F)

• Storage Temperature Range: -52°C to +177°C (-62°F to +350°F)

• Cable Jacket Material: Fluoroethylene propylene (FEP) insulation

• Minimum Bend Radius: 25.4 mm (1.0 in)

Specifically, the FEP insulation provides excellent chemical resistance and dielectric properties. Moreover, the standard construction offers good flexibility for easy routing in most industrial installations.

Compliance and Certifications

The 330190-035-00-00 meets multiple international standards.

• FCC: Complies with Part 15 of FCC Rules

• EMC Directive: 2014/30/EU

• EMC Standards: EN 61000-6-2 (Immunity), EN 61000-6-4 (Emissions)

• RoHS Directive: 2011/65/EU

• Maritime: ABS Rules for Classification (2019)

• Functional Safety: SIL 2 (HFT=0), SIL 3 (HFT=1)

Additionally, the 00 agency approval option means this cable carries no specific country certifications. This makes it suitable for installations where such approvals are not required.

Installation Guidelines

Proper installation ensures reliable performance from your Bently Nevada 330190-035-00-00.

First, inspect the cable for any visible damage before installation. Next, ensure the minimum bend radius of 25.4 mm is maintained throughout the routing path. The standard cable construction offers good flexibility while maintaining signal integrity.

Then, connect the cable to the proximity probe and Proximitor sensor using the gold-plated connectors. Apply the specified torque of 0.565 N•m to ensure proper connection. After that, secure the cable using appropriate clamps or supports to prevent movement. Finally, verify the system gap setting is at -9 Vdc for radial vibration applications.

Packaging and Delivery

Each Bently Nevada 330190-035-00-00 unit is shipped brand new in factory packaging. The shipment includes the 3.5-meter standard extension cable with pre-installed connectors. It also contains protective end caps to safeguard the connectors during shipping.

We ship all orders via reliable couriers. Delivery is handled through FedEx, UPS, or DHL. These expedited shipping methods ensure you receive your parts quickly and safely.

Frequently Asked Questions (FAQ)

1. What is the temperature range for this cable?
The 330190-035-00-00 operates from -52°C to +177°C (-62°F to +350°F) with FEP insulation.

2. Is this cable armored?
No, the 00 cable option indicates standard construction without armoring. Choose the 01 option for armored cable.

3. Can this cable be used with non-XL 3300 probes?
Yes, the 330190-035-00-00 is electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components when the minimum bend radius is observed.

4. What does the 00 agency approval mean?
The 00 suffix means no specific country approval is required, making this Bently Nevada extension cable suitable for general industrial use.

5. Is this cable suitable for SIL-rated safety systems?
Yes, the 330190-035-00-00 supports SIL 2 (HFT=0) and SIL 3 (HFT=1) functional safety applications.