This absolute multi-turn encoder provides reliable and precise motion feedback for complex industrial applications. The TR Electronic 110-01351 utilizes a 65 mm housing design, which is a mechanical necessity for heavy-duty environments requiring robust shaft support. Because the CE65M is an absolute encoder, it retains its exact position data even after a power loss, eliminating the need for a homing cycle upon restart. Specifically, the internal optical or magnetic scanning technology ensures long-term accuracy across millions of rotations.
Meanwhile, this hardware excels in versatility through its programmable parameters. The 110-01351 allows for the configuration of resolution, total range, and output protocols to match specific machine requirements. Its multi-turn capability allows it to track the absolute position over several thousand revolutions, making it ideal for gearboxes, lifting equipment, and long-travel linear axes. Therefore, automation engineers specify the 110-01351 for critical motion control where position loss is not an option.
The performance of this TR Electronic hardware depends on its ability to integrate with high-speed industrial communication networks. The 110-01351 (CE65M) is available with various interface options, including SSI, PROFIBUS, CANopen, or DeviceNet, depending on the specific sub-configuration. It handles high shaft speeds and axial/radial loads without compromising signal integrity. Additionally, the unit features a rugged aluminum or stainless steel housing, providing an IP65 or higher protection rating to withstand dust and moisture.
The hardware ensures data consistency through integrated parity checks and diagnostic functions. identifies internal temperature warnings or scanning errors, allowing for predictive maintenance before a failure occurs. For instance, its robust electronic design suppresses electromagnetic interference (EMI) in electrically noisy environments. Therefore, the 110-01351 remains a foundational asset for large-scale production lines, ensuring that every movement is synchronized with the master controller's clock.
Successful integration of this CE65M encoder requires selecting the appropriate mounting flange and shaft coupling. The 110-01351 acts as a reliable data source for PLC-based motion profiles, providing real-time velocity and position information. Its standardized 65 mm form factor ensures compatibility with a wide range of industrial mounting brackets. Moreover, the modular design of TR Electronic's CE series allows for easy replacement or upgrades to different interface types without changing the mechanical footprint.
Specifically, the "110-01351" variant is tailored for high-availability systems where downtime must be minimized. The encoder supports advanced configuration via software, enabling fine-tuning of the zero point and direction of rotation. Therefore, the 110-01351 ensures both maximum electrical safety and operational flexibility. Its high shock and vibration resistance make it suitable for the most demanding applications in heavy industry, such as steel mills and wind turbines.
Successful deployment requires careful alignment of the encoder shaft to avoid premature bearing wear. First, secure using a flexible coupling to compensate for any minor axial or radial misalignments. Next, connect the shielded communication cable to ensure noise-free data transmission to the PLC. Specifically, you should verify the power supply voltage meets the CE65M technical requirements to prevent electronic damage.
Additionally, monitor the position feedback in your control software during the initial test run to confirm the scaling matches the physical machine movement. You should also check the diagnostic LEDs on the 110-01351 (if equipped) for any status warnings during startup. Meanwhile, ensure the cable gland or connector is properly sealed to maintain the environmental IP rating. Finally, document the programmed parameters for in your system archive to assist future technicians with maintenance or replacement.
Type: Absolute Multi-Turn Rotary Encoder.
Housing Diameter: 65 mm (CE65M Series).
Resolution: High-bit absolute precision.
Retention: Position preserved during power loss.
Durability: Robust industrial housing with high IP rating.
(Note for WordPress: Set Image Alt Text as "110-01351 TR Electronic CE65M absolute multi-turn rotary encoder for industrial automation")
What does "CE65M" signify in the TR Electronic range? It refers to the Compact Encoder series with a 65 mm housing and Multi-turn absolute positioning capabilities.
Does the 110-01351 lose its position when power is disconnected? No, as an absolute encoder, it maintains its position information without the need for a battery or homing.
What interfaces are common for the 110-01351? The CE65M series typically supports SSI, PROFIBUS, or CANopen, among other industrial protocols.
Can the 110-01351 be used in harsh environments? Specifically, the 110-01351 features a high IP rating, making it resistant to dust, moisture, and vibration.
Is this encoder programmable? Yes, many parameters of the 110-01351 can be configured to suit specific system requirements.
| Brand Name | Triconex |
| Model No. | 110-01351 |
| Product Type | Programmable Rotary Encoder |
| hasMerchantReturnPolicy | Adjust according to reality |
| Shippingdetails | Adjust according to reality |
