The FBM242 from Foxboro (by Schneider Electric) is an externally sourced discrete output interface module. It provides sixteen isolated discrete outputs. This module supports voltages from 15 to 60 V dc, 120 V ac/125 V dc, and 240 V ac. Its compact design suits Class G3 harsh environments. Each channel is galvanically isolated for maximum safety.
The Atlas Copco EP11PTI80 HR13-MT-L is a shutoff ergopulse tool for high-speed fastening without reaction force. Its TorqueBoost system delivers rapid torque buildup. The automatic shutoff stops rotation precisely at the correct torque. Trim and AutoTrim functions allow fine adjustments for specialized applications.
The Atlas Copco EP11PTI100 HR13-MT is a shutoff ergopulse tool designed for high-speed fastening. Its TorqueBoost system delivers rapid torque without reaction force. The automatic shutoff ensures precise stopping at the correct torque, making it ideal for complex assembly lines. This tool also supports Trim and AutoTrim functions for fine adjustments.
The Atlas Copco RTP1300-HR20 pneumatic nutrunner features a pistol grip and reversible operation. It provides a max torque of 960 ft-lb at 6.3 bar. Ideal for flange bolting in oil & gas, power generation, and wind energy sectors.
The RTP8100-GIR38 pneumatic screwdriver is a straight-type, reversible tool built for high-torque bolting. It delivers a max torque of 6000 ft-lb at 6.3 bar. Ideal for heavy industrial assembly and maintenance tasks.
The Atlas Copco LMS18 HR13/F is a pistol-grip non shut-off pneumatic impact wrench. It delivers a max torque of 110 ft-lb with a free speed of 8100 r/min. The 1/2" male square drive handles 10 mm bolts. Its Grease Retaining System ensures long service intervals. Ideal for fast tightening or disassembly with minimal reaction force.
The Atlas Copco LMS88 GIR38 is a heavy-duty non shut-off pneumatic impact wrench. It delivers a massive max torque of 7370 ft-lb with 540 blows per minute. The straight design features a 1-1/2" male square drive. Its Grease Retaining System ensures long service intervals. Ideal for large bolt tightening and disassembly with minimal reaction force.
The Atlas Copco LMS08 SR42 is a non shut-off pneumatic impact wrench built for tough environments. It delivers a max torque of 44 ft-lb with 1650 blows per minute. The straight design features a 1/4" female hex output. Its Grease Retaining System ensures long service intervals. Ideal for fast tightening or disassembly with minimal reaction force.
The Eaton MTL5314 is a single-channel trip amplifier for 2- or 3-wire 4-20mA transmitters. It supplies two configurable alarm signals via changeover relays. Each relay triggers independently when the input exceeds or falls below a setpoint. HART communication passes through without interruption. Ideal for Zone 0 and SIL applications.
The Eaton MTL5514D is a single-channel switch/proximity detector interface from the MTL5500 series. It accepts digital inputs from hazardous area sensors and provides two relay outputs. This isolator supports line fault detection (LFD) and phase reversal. Ideal for Zone 0, Zone 2, and SIL2/SIL3 safety loops.
The Eaton Crouse-Hinds MTL5511 is a single-channel isolator for switch or proximity detector inputs. It provides a 7-9Vdc sensor supply and features a relay contact output rated for Zone 2 hazardous areas. With SIL2/SIL3 certification and line fault detection, it suits safety-related applications.
The Eaton Crouse-Hinds MTL5513 is a two-channel isolator for switch or proximity detector inputs. It provides a 7-9V sensor supply and accepts digital signals from hazardous areas. Each channel features independent phase reversal and line fault detection with red LFD indication.
