The 140CRA93100 is a remote I/O drop adapter module for the Modicon Quantum platform. It connects via a single 75 Ohm coaxial cable at 1.544 Mbit/s. This module supports up to 27 expansion I/O modules per drop.
The 140DAO84220 is a 16-channel AC discrete output module for the Modicon Quantum platform. It operates at 20-56V AC with 4A per output and 16A per module. This module delivers reliable AC load switching for industrial applications.
The Schneider Electric 140AVI03000 is an 8-channel analog input module for the Modicon Quantum platform. It supports multiple voltage and current ranges with 16-bit resolution. This module ensures accurate signal conversion and reliable performance in demanding industrial environments. Its differential inputs provide excellent noise immunity.
The Schneider Electric 140EIA92100 is an AS-Interface master module for the Modicon Quantum platform. It connects up to 31 AS-i slaves with 124 discrete inputs and 124 discrete outputs. This module delivers fast 5 ms cycle times and simplifies field device wiring using the AS-i cabling system.
The Schneider Electric 140ESI06210 is an ASCII serial communication module for the Modicon Quantum platform. It provides two RS232C ports for connecting barcode readers, printers, scales, and other serial devices. This module supports up to 255 stored messages with 127 characters each, making it a flexible solution for data exchange.
The Schneider Electric 140CFC03200 is a CableFast terminal block with integrated group fusing for Modicon Quantum I/O modules. It organizes 32 I/O points into four groups of eight, with each group protected by a 0.8 A fuse. This accessory simplifies wiring and adds overcurrent protection for field devices.
The Schneider Electric 140DAO84210 is a 16-channel AC discrete output module for the Modicon Quantum platform. It operates with voltages from 83 to 253V AC and delivers up to 4A per output. This module features fast response times, built-in protection, and clear diagnostic LEDs for reliable field device control.
The Schneider Electric 140NOC78100 is a high-performance Ethernet control module for the Modicon Quantum platform. It supports both Modbus TCP and EtherNet/IP protocols with a 10/100Mbps transmission rate. This module features an embedded 4-port switch and supports hot standby redundancy for critical applications.
The Schneider Electric 140DAI74000 is a 16-channel AC discrete input module for the Modicon Quantum platform. It operates at 230V AC with a frequency range of 47-63Hz. This module features high isolation (1780V), fast response times, and clear diagnostic LEDs for reliable monitoring of AC field devices.
The Schneider Electric 140DDI35310 is a 32-channel DC discrete input module for the Modicon Quantum platform. It operates at 24V DC with negative logic and delivers fast 1ms response times. This module features built-in protection, clear LED status indicators, and robust isolation for reliable field device monitoring.
The Schneider Electric 140DDO35300C is a discrete output module for the Modicon Quantum platform. It provides 32 outputs across 4 isolated groups with positive source logic. This module handles 16A total load and includes comprehensive fault protection for reliable industrial control.
The Schneider Electric 140CRA31908 is an Ethernet RIO drop adaptor for the Modicon Quantum series. It runs on 5 VDC with a 1.2 A current and 6 W power rating. This unit features three Ethernet ports and supports both EtherNet/IP and Modbus TCP protocols. With four LED indicators and an IP20 rating, it offers reliable communication for distributed I/O networks.
