Core Value
The 2MLQ-SS2A achieves stable AC load on-off control for MasterLogic ML200 PLC systems.
Solid-state triac structure eliminates mechanical wear and extends overall module service life.
16-channel high-density layout reduces cabinet occupancy and simplifies system wiring.
No mechanical contact bounce ensures smooth switching and prevents load surge damage.
Direct plug-in installation on ML200 backplane simplifies maintenance and spare parts replacement.
Technical Insights
16-Point Triac Solid-State Output
The module integrates 16 independent triac output channels with 0.6 A rated current per channel.
Solid-state switching without mechanical contacts brings high-frequency response and wear-free operation.
It is specially adapted for AC load driving, avoiding sparking and contact aging issues of relay modules.
Stable output performance ensures continuous and reliable control of on-site execution devices.
Stable Electrical Performance & Anti-Surge Ability
Triac internal circuit features overcurrent and transient surge protection for harsh industrial conditions.
Low on-state resistance maintains steady load driving under continuous operation.
No mechanical bouncing interference reduces false triggering and improves control system stability.
Strong anti-interference performance adapts to electromagnetic noisy industrial environments.
Native ML200 System Compatibility
Fully matches Honeywell MasterLogic ML200 PLC backplane bus with plug-and-play interface.
Unified mechanical dimension and signal definition support direct replacement of same-series modules.
Perfectly adapts to system configuration, power supply and programming environment without extra adapters.
Installation & Maintenance
Backplane Mounting
Insert the 2MLQ-SS2A firmly into the corresponding slot of ML200 PLC base unit.
Lock the module retaining clip to prevent loose contact caused by on-site vibration.
Ensure good overall contact with backplane power and communication pins.
Field Wiring Guidelines
Wire AC load circuits according to terminal definitions of each output channel.
Route load cables separately from low-voltage control signal cables to reduce EMI interference.
Do not exceed the rated 0.6 A current per channel to avoid module overheating damage.
Label all output channels clearly for convenient later troubleshooting and maintenance.
Routine Inspection
Check module power and running status indicators weekly to confirm normal operation.
Inspect terminal tightness monthly to eliminate poor contact faults.
Avoid overload operation of each channel to guarantee long-term stable service.
Keep the PLC cabinet ventilated and dust-free to maintain thermal performance.
Buyer’s Guide FAQ
Which PLC system is 2MLQ-SS2A compatible with?
It is specially designed for Honeywell MasterLogic ML200 series PLC controllers.
Direct backplane plug-in installation with no additional conversion modules required.
What output type and channel count does this module have?
It is a 16-channel triac solid-state digital output module, with 0.6 A rated current per channel.
Suitable for AC load switching control applications.
What is the advantage of triac output over relay output?
Triac is solid-state with no mechanical contacts, no sparking, no wear, longer lifespan and faster switching response.
It is ideal for frequent on-off control scenarios and reduces maintenance frequency greatly.
What is the maximum load current per channel?
Each channel supports a rated maximum current of 0.6 A.
Overload use is prohibited to prevent module damage and control failure.
