The Keyence FU-54TZ is a compact thrubeam fiber unit designed for precise object detection in tight spaces. Its flat head and ø1mm optical axis enable accurate sensing of tiny targets with a minimum detectable object of 0.005mm.
The Keyence AP-33A is a positive-pressure main unit rated for 0 to 1.000 MPa. It provides NPN open collector outputs and a 1 to 5 V analogue signal. The 3 1/2-digit dual-colour LED display shows readings clearly on the factory floor.
The Keyence LV-H62 is a retro-reflective laser sensor head with a small beam spot. It uses a 660 nm visible red laser and reaches up to 7 m in SUPER mode. The Class II design suits standard industrial detection tasks.
The Keyence F-6HA is a small beam spot lens that narrows the light from compatible fiber units. It produces a spot of about 1.0 mm with the FU-21X and works at a focal distance of 35 ±3 mm. The lens weighs roughly 5 g.
The Keyence EH-108 is a shielded, oil-resistant proximity sensor head with a threaded body. It offers a 2.5 mm maximum detecting distance and 0.005 mm repeatability. The IP67 rating suits harsh factory environments.
The Keyence LV-N12N is a cable-type expansion amplifier for digital laser sensors. It offers NPN open collector output, selectable LIGHT-ON or DARK-ON modes, and response times down to 80 µs. Up to 17 units connect in one expansion bank.
Genuine Keyence FU-57TZ fiber optic sensor with side-emitting optical head. The ø1.0 fiber is 1 m long and free-cut. Tough-Flex design allows an R2 mm bend radius. Detects objects down to 0.005 mm. Fast Fedex UPS DHL shipping.
Genuine Keyence FU-35TG reflective fiber unit with M6 coaxial threaded head. The 1 m fiber cable cannot be cut. It detects gold wire down to 0.005 mm diameter. Rated for -40 to +50°C operation. Fast Fedex UPS DHL shipping.
This IV4-G120 is a compact DIN-rail sensor amplifier for Keyence IV4-G vision heads. It delivers AI-based inspection with 65 tools and multiple industrial protocols.
Genuine Keyence FU-67G reflective fiber unit with M6 parallel sensing head. The 1 m fiber cable cannot be cut. It detects gold wire down to 0.005 mm diameter. Built for -40 to +50°C environments. Fast Fedex UPS DHL shipping.
Genuine Keyence OP-51607 tungsten electrode probe. Designed for SJ-M010 and SJ-M020 static eliminators. This unit cannot be used with SJ-M020G models. Fast Fedex UPS DHL shipping.
The LV-N11CP is a Keyence LV-N series digital laser sensor amplifier. It works as a main unit with an M8 connector. It offers PNP output, two control outputs, and fast 80 µs response.
