This Bently Nevada 990 Vibration Transmitter converts proximity probe signals into a 4-20 mA output. It supports a 0-4 mils full-scale range and a 7.0 meter system length. The unit includes DIN clips and screws, plus approvals for hazardous areas.
The Bently Nevada 990-04-50-03-05 is a 2-wire loop-powered vibration transmitter. It accepts one 3300 NSv proximity probe and provides a 4-20 mA output proportional to vibration. This model features DIN clip mounting and full hazardous area approvals.
The Bently Nevada 990-04-50-02-05 is a 2-wire vibration transmitter for non-contacting proximity probe input. It provides a 4-20 mA signal proportional to vibration amplitude. This model supports full-scale 0-4 mils pp, 5.0m system length, and hazardous area approvals.
This Bently Nevada 991-06-50-01-01 thrust transmitter carries CSA Division 2 approval for hazardous locations. It measures axial displacement with a 4-20 mA output. The device accepts a 3300 NSv proximity probe. Mounting uses 35 mm DIN-rail clips. Ideal for refineries and chemical plants.
This Bently Nevada 991-06-50-03-00 thrust transmitter measures axial displacement with a 4-20 mA output. It accepts a 3300 NSv proximity probe. The device offers a 0.6-0-0.6 mm full-scale range. Mounting uses DIN clips and screws. Perfect for turbine thrust position monitoring.
This Bently Nevada 991-06-50-02-00 Thrust Transmitter measures axial vibration with a 4-20 mA output. It accepts a 3300 NSv proximity probe. The device supports a 0.6-0-0.6 mm linear range. Its compact design mounts on a DIN rail. Ideal for turbine and compressor monitoring.
The Bently Nevada 177230-02-02-05 is a hazardous-area approved seismic transmitter. It measures peak vibration velocity from 0 to 50.8 mm/s. Frequency response starts at 3 Hz for low-speed machinery. The 4-20 mA loop output connects directly to PLCs, DCS, or SCADA. Its 316L stainless steel housing ensures durability in harsh environments.
This Bently Nevada 177230-01-01-CN is a rugged seismic transmitter built for industrial vibration monitoring. It converts RMS velocity into a 4-20 mA signal. The device uses a 316L stainless steel housing. It supports a 10 Hz to 1 kHz frequency range. Perfect for PLCs, DCS, and SCADA systems.
The Bently Nevada 990-04-50-01-05 is a two-wire loop-powered vibration transmitter for hazardous locations. It accepts a 3300 NSv proximity probe and outputs 4-20 mA over a 0-4 mils pp range. This unit carries ATEX Zone 0, CSA Division 2, and ABS maritime approvals.
The Bently Nevada 990-04-50-03-01 is a two-wire loop-powered vibration transmitter. It works with a 3300 NSv proximity probe to measure radial vibration. The output is 4-20 mA over a 0-4 mils pp full-scale range. This unit mounts on a DIN rail and suits CSA Division 2 areas.
The Bently Nevada 991-06-50-03-01 is a two-wire, loop-powered thrust transmitter. It converts axial position signals from a 3300 NSv proximity probe into a 4-20 mA output. Designed for DIN rail mounting, this model serves 0.6-0-0.6 mm full-scale applications.
The Bently Nevada 991-06-50-02-01 is a thrust transmitter for axial position monitoring. It accepts a 3300 NSv proximity probe. This 4-20 mA device mounts on a DIN rail. It suits CSA Division 2 locations.
